pvlib.tracking.SingleAxisTracker

class pvlib.tracking.SingleAxisTracker(axis_tilt=0, axis_azimuth=0, max_angle=90, backtrack=True, gcr=0.2857142857142857, **kwargs)

Inherits the PV modeling methods from PVSystem.

Parameters:

• axis_tilt (float, default 0) – The tilt of the axis of rotation (i.e, the y-axis defined by axis_azimuth) with respect to horizontal, in decimal degrees.
• axis_azimuth (float, default 0) – A value denoting the compass direction along which the axis of rotation lies. Measured in decimal degrees East of North.
• max_angle (float, default 90) – A value denoting the maximum rotation angle, in decimal degrees, of the one-axis tracker from its horizontal position (horizontal if axis_tilt = 0). A max_angle of 90 degrees allows the tracker to rotate to a vertical position to point the panel towards a horizon. max_angle of 180 degrees allows for full rotation.
• backtrack (bool, default True) – Controls whether the tracker has the capability to “backtrack” to avoid row-to-row shading. False denotes no backtrack capability. True denotes backtrack capability.
• gcr (float, default 2.0/7.0) – A value denoting the ground coverage ratio of a tracker system which utilizes backtracking; i.e. the ratio between the PV array surface area to total ground area. A tracker system with modules 2 meters wide, centered on the tracking axis, with 6 meters between the tracking axes has a gcr of 2/6=0.333. If gcr is not provided, a gcr of 2/7 is default. gcr must be <=1.

__init__(axis_tilt=0, axis_azimuth=0, max_angle=90, backtrack=True, gcr=0.2857142857142857, **kwargs)

Initialize self. See help(type(self)) for accurate signature.

Methods

__init__([axis_tilt, axis_azimuth, …])	Initialize self.
adrinverter(v_dc, p_dc)
ashraeiam(aoi)	Deprecated.
calcparams_cec(effective_irradiance, …)	Use the calcparams_cec() function, the input parameters and self.module_parameters to calculate the module currents and resistances.
calcparams_desoto(effective_irradiance, …)	Use the calcparams_desoto() function, the input parameters and self.module_parameters to calculate the module currents and resistances.
calcparams_pvsyst(effective_irradiance, …)	Use the calcparams_pvsyst() function, the input parameters and self.module_parameters to calculate the module currents and resistances.
faiman_celltemp(poa_global, temp_air[, …])	Use temperature.faiman() to calculate cell temperature.
first_solar_spectral_loss(pw, airmass_absolute)	Use the first_solar_spectral_correction() function to calculate the spectral loss modifier.
get_aoi(surface_tilt, surface_azimuth, …)	Get the angle of incidence on the system.
get_iam(aoi[, iam_model])	Determine the incidence angle modifier using the method specified by iam_model.
get_irradiance(surface_tilt, …[, …])	Uses the irradiance.get_total_irradiance() function to calculate the plane of array irradiance components on a tilted surface defined by the input data and self.albedo.
i_from_v(resistance_shunt, …)	Wrapper around the i_from_v() function.
localize([location, latitude, longitude])	Creates a LocalizedSingleAxisTracker object using this object and location data.
physicaliam(aoi)	Deprecated.
pvsyst_celltemp(poa_global, temp_air[, …])	Uses temperature.pvsyst_cell() to calculate cell temperature.
pvwatts_ac(pdc)	Calculates AC power according to the PVWatts model using pvwatts_ac(), self.module_parameters[‘pdc0’], and eta_inv_nom=self.inverter_parameters[‘eta_inv_nom’].
pvwatts_dc(g_poa_effective, temp_cell)	Calcuates DC power according to the PVWatts model using pvwatts_dc(), self.module_parameters[‘pdc0’], and self.module_parameters[‘gamma_pdc’].
pvwatts_losses()	Calculates DC power losses according the PVwatts model using pvwatts_losses() and self.losses_parameters.`
sapm(effective_irradiance, temp_cell, **kwargs)	Use the sapm() function, the input parameters, and self.module_parameters to calculate Voc, Isc, Ix, Ixx, Vmp, and Imp.
sapm_aoi_loss(aoi)	Deprecated.
sapm_celltemp(poa_global, temp_air, wind_speed)	Uses temperature.sapm_cell() to calculate cell temperatures.
sapm_effective_irradiance(poa_direct, …[, …])	Use the sapm_effective_irradiance() function, the input parameters, and self.module_parameters to calculate effective irradiance.
sapm_spectral_loss(airmass_absolute)	Use the sapm_spectral_loss() function, the input parameters, and self.module_parameters to calculate F1.
scale_voltage_current_power(data)	Scales the voltage, current, and power of the DataFrames returned by singlediode() and sapm() by self.modules_per_string and self.strings_per_inverter.
singleaxis(apparent_zenith, apparent_azimuth)	Get tracking data.
singlediode(photocurrent, …[, ivcurve_pnts])	Wrapper around the singlediode() function.
snlinverter(v_dc, p_dc)	Uses snlinverter() to calculate AC power based on self.inverter_parameters and the input parameters.